[. . . ] Indoor Unit
WH-ADC0309H3E5UK
Outdoor Unit
WH-UD03HE5-1 WH-UD05HE5-1 WH-UD07HE5-1 WH-UD09HE5-1
Quick Menu Guide Air-to-Water Hydromodule + Tank Installation Instructions attached. Serial number and production year please refer to name plate.
Manufactured by: Panasonic Appliances Air-Conditioning Malaysia Sdn. [. . . ] Press to confirm your selection.
is
(The powerful operation starts approximately 1 minute after pressed. ) • Powerful mode is set off.
Powerful
• The Powerful mode operates for 30 minutes.
• The Powerful mode operates for 60 minutes.
• The Powerful mode operates for 90 minutes.
■ Note:
• Powerful is disabled when operation is turned OFF.
3
Select this icon to operate quietly. Press to confirm your selection.
is pressed. )
(The quiet operation starts approximately 1 minute after • Quiet mode is set off.
Quiet
• The Quiet mode operates at level 1.
• The Quiet mode operates at level 2.
• The Quiet mode operates at level 3.
Level 3 is the most quiet mode.
• Select this to set a timer for the Quiet mode operation. • Select “Yes” using
buttons.
Select pattern “1” ~ “6”.
Select “Edit”. • If you select “Delete”, the timer setting of the selected pattern will be deleted. Set the hour and minutes.
Select the level of Quiet.
■ Note:
• If the time overlaps with another pattern, "Set time is overlapped!" will appear on the screen.
4
How to use the Quick Menu
Select to force the Heater on. Press to confirm your selection.
is
(The Force Heater mode starts approximately 1 minute after pressed. ) • Force Heater is turned off.
Force Heater
• Force Heater is turned on.
■ Note:
• Force Heater is disabled whenever operation is already on and ‘Disabled due to operation ON!’ will be displayed.
5
Select this icon to delete (cancel) or change the pre-set Weekly Timer. Press to confirm your selection.
• Timer is not ON.
Weekly Timer
• Timer is set. • If you select “No”, the screen will return to the Main Screen.
• Timer setup: Select Timer setup to edit the Weekly Timer. [Example of a Timer setup] Select the day(s) which you wish to edit using
buttons.
If all 6 patterns are not preset, this screen will be displayed.
1 Select pattern “1” ~ “6”. / • Select mode using
5 Set the temperature for both Zone 1 and 2 (if your system has the 2-Zone setting).
6 Set the Tank temperature.
■ Note:
• Timer is disabled when Force Heater is turned on or Heat-Cool SW is enabled. [. . . ] Press to confirm your selection.
(When the mode has been accepted, below screen will be displayed. ) Select “Yes”. (The Main Screen will be locked. ) • If “No” is selected, the screen will return to the Main Screen.
R/C Lock
To unlock the Remote Controller
Press any key.
(When the mode has been accepted, below screen will be displayed. ) Enter any 4 digits of number (if the number is correct, the screen will be unlocked).
To reset forgotten password (under operation OFF screen)
Press , and continuously for 5 seconds.
(When the mode has been accepted, below screen will be displayed. ) Select “Reset”.
(The screen will be off after 3 seconds. )
7
Country UK/England UK/Ireland
Telephone Number +44 (0) 134 485 3393 +353 (0) 872 696 043
Panasonic Corporation
Web site: http://www. panasonic. com © Panasonic Corporation 2016 Printed in Malaysia
Authorised representative in EU Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany ACXF55-03400 SS0416-0 [. . . ]